Oxyplumb Commercial · Oxfordshire & the Cotswolds
A new Winterwarm heater should make the space easier to work in and the system easier to manage. We can help with equipment selection, replacement planning and care for your existing installation.
Explore the Winterwarm range
A workshop with a gas supply, an all-electric unit and a building with central hot-water plant can need very different equipment. We can help you understand the differences, including the connections, controls and running-cost considerations.
Equipment & application
XR+ is a suspended gas-fired unit-heater range. The heater, fan and control arrangement need to suit both the heat demand and the way the space is occupied. We can review an existing installation or plan a replacement with service access and usable floor area in mind.
Worth discussing forWorkshops and open commercial working areas.
Winterwarm XR+ · manufacturer details (opens in a new tab)
Equipment & application
The HR range adds condensing gas-fired heating to the comparison. We consider the flue and condensate arrangements at the outset, together with how the unit will distribute heat. A survey helps establish whether the additional installation requirements make sense for your premises.
Worth discussing forCommercial spaces comparing condensing gas-heating options.
Winterwarm HR · manufacturer details (opens in a new tab)
Equipment & application
EH uses electric heating rather than a gas burner. That changes the infrastructure needed: available electrical capacity, the control arrangement and operating hours become central to the decision. We can help compare the practical requirements without assuming electric resistance heating is the lowest-cost option to run.
Worth discussing forSuitable spaces considering heating without a gas connection.
Winterwarm EH electric heater · manufacturer details (opens in a new tab)
Equipment & application
WWH takes heat from a hot-water circuit and transfers it to the room through a coil and fan. The available water temperature and flow determine the useful output. We’ll check those conditions before discussing units for an existing boiler or another suitable heat source.
Worth discussing forBuildings distributing heat from central hot-water plant.
Winterwarm WWH water-fed unit · manufacturer details (opens in a new tab)Send us a few photographs and tell us how your building is used. We’ll help narrow down the choices and explain the installation work around the equipment.
These are starting points for a conversation, not interchangeable products or a specification without a survey.
| Option | When to discuss it | What we check |
|---|---|---|
| Winterwarm XR+ | Workshops and open commercial working areas | Model output, air throw, flue and controls |
| Winterwarm HR | Commercial spaces comparing condensing gas-heating options | Condensate disposal, heat demand and mounting position |
| Winterwarm EH electric heater | Suitable spaces considering heating without a gas connection | Electrical capacity, operating hours and energy costs |
| Winterwarm WWH water-fed unit | Buildings distributing heat from central hot-water plant | Coil duty at actual water temperatures and pipework capacity |
From survey to handover
We’ll begin with the dimensions of the building, its operating hours and the areas that are difficult to heat. If you already have Winterwarm equipment, photographs and model details help us plan the assessment. The proposal can then set out the heater, controls, connection work and changeover arrangements as a coordinated job.
Looking after existing equipment
Keep any fault message and a note of when the problem occurs. An intermittent start-up fault needs a different investigation from poor heating across one side of a workshop. We can review the installed model and agree servicing or diagnosis, with safe high-level access planned before the visit.
We’ll agree the visit and access requirements with you. Servicing follows the installed equipment’s requirements; any additional repair, specialist attendance or replacement parts are discussed as part of the scope. If you look after several buildings, ask us about planned maintenance.
Ask about servicingUseful to know
Possibly, but compatibility needs to be checked against the replacement heater and the intended operating arrangement. We’ll identify what can be retained and what needs updating before the installation is agreed.
Send your postcode, a short description of the problem or planned work, and photographs of the equipment and its model plate. Tell us about any access restrictions and important operating times. We’ll help establish whether a site assessment is needed before preparing the proposal.
We support commercial premises across Oxfordshire and the surrounding Cotswolds, including Oxford, Witney, Carterton and Abingdon. Check our areas served, or send your postcode with the enquiry so we can confirm the next step.
Use the official information below to explore the equipment. We’ll confirm current availability, the exact specification and applicable terms when quoting.
Independent customer feedback
There is more to your project than choosing a manufacturer. See what customers say about Oxyplumb, then discuss the installation or servicing with our commercial team.
Public Google profile
from 311 reviews
Read customers’ experiences on Oxyplumb’s official Google profile.
Verified customer reviews
from 260 reviews
99% of customers recommend Oxyplumb on the official profile.
Google and Which? rating figures checked on 21 October 2026. Visit either official profile for the latest figures.
A helpful team, a clear next step
Installation, a replacement or help with a fault—we’ll work through the options with you.
Oxfordshire & the Cotswolds
Oxyplumb Commercial can help with Winterwarm warm-air heater installation and servicing across Oxfordshire and the Cotswolds. We can discuss Winterwarm equipment around your building’s heat demand, working hours and available installation space.
Let’s talk about your building
Share your site postcode, equipment photographs and the work you need. We’ll confirm the scope and visit arrangements with you.
Discuss your local project