Commercial & industrial heating across Oxfordshire

Oxyplumb Commercial · Oxfordshire & the Cotswolds

Lowara water-pressure systems in Oxfordshire

Whether you have an existing Lowara set or are planning a new water system, we can help you work through the pressure, flow and installation requirements before equipment is ordered.

Lowara GHVR variable-speed pressure booster set
Lowara GHVR variable-speed pressure booster set

Explore the Lowara range

Lowara booster sets and the controls behind them.

Lowara equipment spans different product generations and pumping arrangements. We can compare a new set with a targeted repair, identify the actual controller and establish how the proposed system should behave at both quiet and busy times.

Lowara GHVR — manufacturer product photograph

Equipment & application

Lowara GHVR

GHVR is a variable-speed commercial booster-set option. The selected pumps, controller and system connections need to deliver the required flow and pressure together. We can review the installation around an existing set and explain which parts of it can sensibly be retained.

  • Variable-speed booster-set range
  • Match the complete set to the duty

Worth discussing forCommercial water-pressure installations and replacements.

Lowara GHVR · manufacturer details (opens in a new tab)
Lowara SMB — manufacturer product photograph

Equipment & application

Lowara SMB

SMB offers a smart variable-speed packaged booster arrangement. We can compare the selected pump configuration with the building’s demand, available power and space. The proposal should state the exact set and duty rather than rely on a generic product-family name.

  • Packaged variable-speed boosting
  • Model and configuration selected for the building

Worth discussing forSuitable buildings comparing packaged pressure-boosting options.

Lowara SMB · manufacturer details (opens in a new tab)
Lowara GHV with hydrovar X+ — manufacturer product photograph

Equipment & application

Lowara GHV with hydrovar X+

The GHV range pairs multiple pumps with hydrovar X+ variable-frequency drives. We can assess the intended operating arrangement and resilience, including any building-management interface required. It is important to distinguish this equipment from older Lowara control generations when planning upgrades.

  • Multi-pump range with hydrovar X+
  • Specify the control generation clearly

Worth discussing forCommercial projects reviewing current multi-pump technology.

Lowara GHV with hydrovar X+ · manufacturer details (opens in a new tab)
Lowara hydrovar X+ pump and drive — manufacturer product photograph

Equipment & application

Lowara hydrovar X+ pump and drive

The pump and its drive need to be considered together when investigating a fault or planning replacement. We can check the model details, compatibility and system requirements before proposing parts. A current drive should not be assumed to be a direct replacement for every older controller.

  • Integrated pump-and-drive equipment
  • Identify existing components before replacement

Worth discussing forMaintenance planning and assessment of existing booster equipment.

Lowara hydrovar X+ pump and drive · manufacturer details (opens in a new tab)

Not sure which option fits?

Send us a few photographs and tell us how your building is used. We’ll help narrow down the choices and explain the installation work around the equipment.

Ask Oxyplumb for advice

What matters for your building?

These are starting points for a conversation, not interchangeable products or a specification without a survey.

Lowara: options and planning checks
OptionWhen to discuss itWhat we check
Lowara GHVRCommercial water-pressure installations and replacementsDuty, controller generation and existing connections
Lowara SMBSuitable buildings comparing packaged pressure-boosting optionsPump configuration, controls and measured supply
Lowara GHV with hydrovar X+Commercial projects reviewing current multi-pump technologyDuty, drive configuration, standby requirement and interfaces
Lowara hydrovar X+ pump and driveMaintenance planning and assessment of existing booster equipmentPump/drive compatibility, electrical supply and operating history

From survey to handover

Lowara installation & replacement.

If you are replacing a Lowara set, please share photographs of the surrounding plant as well as the pumps. We’ll consider access for removal, new connections and how the building will operate during the work. The agreed specification should state the required duty, controls and commissioning arrangements clearly.

What we’ll work through with you

  • Incoming flow and pressure measured while outlets are running
  • Simultaneous demand and pressure needed at the furthest outlets
  • Storage, backflow protection and water-undertaker requirements
  • Duty/standby needs, electrical supply, access and noise
Plan your installation with Oxyplumb

Looking after existing equipment

Lowara servicing & fault investigation.

Tell us whether the issue is low pressure, rapid cycling, excessive noise or a control alarm. We can discuss maintenance and fault investigation against the actual model and connected equipment. Where a component is obsolete or a replacement changes the specification, we’ll explain that before proposing further work.

We’ll agree the visit and access requirements with you. Servicing follows the installed equipment’s requirements; any additional repair, specialist attendance or replacement parts are discussed as part of the scope. If you look after several buildings, ask us about planned maintenance.

Ask about servicing

Useful to know

Your Lowara questions.

Can you replace just one Lowara pump in a booster set?

It may be possible, but compatibility with the remaining pumps, controller and system duty needs checking. We’ll compare a targeted repair with a wider replacement where appropriate, without assuming a matching brand makes components interchangeable.

What should I send when asking for a quote?

Send your postcode, a short description of the problem or planned work, and photographs of the equipment and its model plate. Tell us about any access restrictions and important operating times. We’ll help establish whether a site assessment is needed before preparing the proposal.

Which areas do you cover?

We support commercial premises across Oxfordshire and the surrounding Cotswolds, including Oxford, Witney, Carterton and Abingdon. Check our areas served, or send your postcode with the enquiry so we can confirm the next step.

Manufacturer information.

Use the official information below to explore the equipment. We’ll confirm current availability, the exact specification and applicable terms when quoting.

Independent customer feedback

The right equipment. A team you can trust.

There is more to your project than choosing a manufacturer. See what customers say about Oxyplumb, then discuss the installation or servicing with our commercial team.

Public Google profile

Google Reviews

4.9/5

from 311 reviews

Read customers’ experiences on Oxyplumb’s official Google profile.

Read Google reviews

Verified customer reviews

Which? Trusted Traders

4.9/5

from 260 reviews

99% of customers recommend Oxyplumb on the official profile.

View Which? reviews

Google and Which? rating figures checked on 21 October 2026. Visit either official profile for the latest figures.

A helpful team, a clear next step

Tell us what you need your system to do.

Installation, a replacement or help with a fault—we’ll work through the options with you.

Send your enquiry

Oxfordshire & the Cotswolds

Your Lowara system, supported locally

Oxyplumb Commercial can help with Lowara water-pressure system installation and servicing across Oxfordshire and the Cotswolds. We can help compare Lowara replacement options against the pressure, flow and access needed at your commercial premises.

Let’s talk about your building

Not sure where to start?

Share your site postcode, equipment photographs and the work you need. We’ll confirm the scope and visit arrangements with you.

Discuss your local project