Oxyplumb Commercial · Oxfordshire & the Cotswolds

Reznor warm-air heating in Oxfordshire

Need to replace a Reznor heater or improve heating across your premises? Oxyplumb Commercial can help you review the equipment, the way the building is used and the practical installation work.

Discuss your Reznor system Call 01993 259029

Reznor Photon suspended warm-air heater

Explore the Reznor range

Explore Reznor equipment for different working spaces.

Reznor’s range extends beyond one suspended heater. We can compare a conventional unit, a condensing arrangement or cabinet heating, then consider whether circulation fans would make the occupied space more comfortable.

Equipment & application

Reznor Photon

Photon combines a modulating gas burner with an axial fan in a suspended heater. We assess the heating demand, the intended air path and the compatible controls together. That matters in a busy workshop where the best mounting position is not necessarily directly above the coldest area.

Suspended gas-fired unit
Modulating burner with axial airflow

Worth discussing forOpen workshops and industrial units.

Reznor Photon · manufacturer details

Equipment & application

Reznor RHeco

RHeco is a condensing suspended gas-heater option. A proposal needs to account for condensate disposal as well as the flue, gas supply and controls. We’ll help compare the complete installation with other approaches; a product efficiency figure alone is not a forecast of your building’s fuel bill.

Condensing gas-heater range
Assess the complete installation cost

Worth discussing forReplacement projects considering condensing warm-air heating.

Reznor RHeco · manufacturer details

Equipment & application

Reznor COMET+ cabinet

COMET+ is a floor-standing cabinet range with free-blowing and ducted options. Different fuel and efficiency variants are offered, so we establish the exact configuration rather than treat every COMET+ as the same appliance. Cabinet positioning also needs to preserve vehicle routes and maintenance access.

Cabinet arrangement
Free-blowing or ducted configurations

Worth discussing forWarehouses and larger spaces considering cabinet heating.

Reznor COMET+ cabinet · manufacturer details

Equipment & application

Reznor DS destratification fan

DS fans bring a separate air-circulation option to a high space. We can assess their location alongside the heaters, avoiding racking, lifting equipment and occupied areas where draughts would be uncomfortable. Their role is to redistribute existing warmth, not replace the heat source.

Air redistribution rather than heat generation
Useful to assess with existing or new heaters

Worth discussing forHigh-bay premises with heat collecting near the roof.

Reznor DS destratification fan · manufacturer details

Not sure which option fits?

Send us a few photographs and tell us how your building is used. We’ll help narrow down the choices and explain the installation work around the equipment.

Ask Oxyplumb for advice

What matters for your building?

These are starting points for a conversation, not interchangeable products or a specification without a survey.

Reznor: options and planning checks
Option	When to discuss it	What we check
Reznor Photon	Open workshops and industrial units	Mounting, gas supply, flue and modulation controls
Reznor RHeco	Replacement projects considering condensing warm-air heating	Condensate route, selected model and control compatibility
Reznor COMET+ cabinet	Warehouses and larger spaces considering cabinet heating	Chosen fuel, air distribution and floor-space requirements
Reznor DS destratification fan	High-bay premises with heat collecting near the roof	Mounting height, airflow and temperature pattern

From survey to handover

Reznor installation & replacement.

If you are changing from an older Reznor unit, we’ll check the gas connection, flue position, electrical provision and mounting points before proposing a replacement. Keeping the same brand does not automatically mean these can stay. We’ll explain the associated work and the planned interruption to heating.

What we’ll work through with you

Building dimensions, insulation and frequently opened doors
Gas supply, flue routes and safe access to high-level equipment
Working zones, operating hours and temperature control
Air throw, obstructions and the need for air circulation

Plan your installation with Oxyplumb

Looking after existing equipment

Reznor servicing & fault investigation.

Let us know about lockouts, unusual fan noise or rooms that fail to reach temperature. We can discuss a planned service or a diagnostic visit, with suitable access agreed beforehand. Any additional parts or remedial work will be explained separately, with availability checked for the particular appliance.

We’ll agree the visit and access requirements with you. Servicing follows the installed equipment’s requirements; any additional repair, specialist attendance or replacement parts are discussed as part of the scope. If you look after several buildings, ask us about planned maintenance.

Ask about servicing

Useful to know

Your Reznor questions.

Can you replace an older Reznor heater with a Photon?

It may be a suitable option, but the new unit must be checked against the building load and existing services. The survey should identify any flue, control, mounting or supply changes rather than treat the replacement as automatically interchangeable.

What should I send when asking for a quote?

Send your postcode, a short description of the problem or planned work, and photographs of the equipment and its model plate. Tell us about any access restrictions and important operating times. We’ll help establish whether a site assessment is needed before preparing the proposal.

Which areas do you cover?

We support commercial premises across Oxfordshire and the surrounding Cotswolds, including Oxford, Witney, Carterton and Abingdon. Check our areas served, or send your postcode with the enquiry so we can confirm the next step.

Manufacturer information.

Use the official information below to explore the equipment. We’ll confirm current availability, the exact specification and applicable terms when quoting.

Independent customer feedback

The right equipment. A team you can trust.

There is more to your project than choosing a manufacturer. See what customers say about Oxyplumb, then discuss the installation or servicing with our commercial team.

Public Google profile

Google Reviews

4.9/5

from 311 reviews

Read customers’ experiences on Oxyplumb’s official Google profile.

Read Google reviews

Verified customer reviews

Which? Trusted Traders

4.9/5

from 260 reviews

99% of customers recommend Oxyplumb on the official profile.

View Which? reviews

Google and Which? rating figures checked on 21 October 2026. Visit either official profile for the latest figures.

A helpful team, a clear next step

Tell us what you need your system to do.

Installation, a replacement or help with a fault—we’ll work through the options with you.

Send your enquiry

Oxfordshire & the Cotswolds

Your Reznor system, supported locally

Oxyplumb Commercial can help with Reznor warm-air heater installation and servicing across Oxfordshire and the Cotswolds. For new or existing Reznor equipment, we’ll discuss mounting height, working zones and access for servicing before agreeing the work.

Where we can help

Oxfordshire

The Cotswolds

See all areas we cover

Let’s talk about your building

Not sure where to start?

Share your site postcode, equipment photographs and the work you need. We’ll confirm the scope and visit arrangements with you.

Discuss your local project

Commercial boiler manufacturers

Keep your building working.

A better plant room, planned as a whole.

Warm-air heating manufacturers

Air-conditioning manufacturers

Commercial hot water manufacturers

Cold-water boosting manufacturers

Gas connections that suit the job.

Practical plumbing for busy premises.

A complete refurbishment, thoughtfully planned.

Reznor warm-air heating in Oxfordshire